A shell fragment left hot inside a tank barrel caused the next round to detonate during a live-fire drill in Oita Prefecture in April, killing three soldiers, the Ground Self-Defense Force said on the 19th in a probe it conducted itself.
The accident happened on April 21 at the Hijudai training area in Oita Prefecture, where a shell burst during a tank gunnery drill and left four crew members dead or injured, Kyodo News reported.
The tank was a domestically built Type 10, firing a 120-millimeter anti-tank high-explosive round.
How the blast reached the crew
Part of a rubber band fitted to the round fired just before stayed behind in the chamber, the section of the barrel where the propellant charge sits.
When the next round was loaded automatically, its casing struck the barrel and damaged the paint on its surface, exposing a flammable material.
The band fragment, believed to have reached about 300 to 400 degrees Celsius, touched that exposed material. The round ignited about 15 seconds after loading and burst.
Because of the fragment, the breech block — the mechanism separating the barrel from the turret, the upper part of the hull where the crew sits — did not close completely. The blast flowed back into the crew compartment and caused the casualties.
The crew
Three soldiers inside the turret died: the tank commander, the gunner and a safety officer. The driver was seriously injured.
The Ground Self-Defense Force released the findings as its own investigation, with no outside body examining the accident or the safety of live-fire training.
